Calendar

October 2017
SunMonTueWedThuFriSat
 << < > >>
1234567
891011121314
15161718192021
22232425262728
293031    

Announce

Who's Online?

Member: 0
Visitors: 3

rss Syndication

25 Apr 2017 - 05:15:35 pm

How To Preserve Gear Pumps

Sauer Danfoss (Turolla) Gear Pumps

Sauer Danfoss gear pumps equipped by P&R Hydraulics Ltd 01603 424880 - P&R Hydraulics Ltd is an official Sauer Danfoss distributor and can provide a range of hydraulic elements. The lube oil supply downstream of the lube oil filter feeds the turning gear pump, which is driven by the same AC-Motor that drives the jacking oil pump. Oil that is discharged from the pump is guided to the common turning gear housing, which consists of an axial movable drive pinion, a coupled radial piston motor and a control block. Piston strikes axially towards a spring power within the course of the gear rim on the turbine shaft.

Gear pumps are easy, durable and inexpensive pumps which are suitable for pressures beneath 20 MPa (three,000 psi). These pumps fall underneath optimistic displacement, which means that they pump a steady amount of fluid for each cycle. The liquid is then trapped by the gear teeth and forced out to the outlet throughout the discharge stroke. For lubrication, the gear pump utilises a small quantity of oil that comes from the forced facet of the gears that flows via the hydrodynamic bearings and expels the identical oil to the part of the gears with low pressure.

Gear pumps are easy, sturdy and inexpensive pumps that are suitable for pressures under 20 MPa (three,000 psi). These pumps fall below positive displacement, which means that they pump a steady quantity of fluid for each cycle. The liquid is then trapped by the gear teeth and compelled out to the outlet through the discharge stroke. For lubrication, the gear pump utilises a small quantity of oil that comes from the compelled side of the gears that flows by means of the hydrodynamic bearings and expels the same oil to the a part of the gears with low strain.

After engagement, managed by a limit change, the complete strain from the turning gear pump is equipped to the radial piston motor turning the shaft with full turning gear velocity. Two solenoid valves, one for creep pace Tu and the other for full velocity, control the turning gear oil supply. The turning gear pump and the jacking oil pump are driven by one widespread AC motor.

Gear pumps are simple, durable and cheap pumps which might be appropriate for pressures beneath 20 MPa (three,000 psi). These pumps fall under optimistic displacement, which signifies that they pump a gradual amount of fluid for each cycle. The liquid is then trapped by the gear tooth and compelled out to the outlet in the course of the discharge stroke. For lubrication, the gear pump utilises a small amount of oil that comes from the forced side of the gears that flows by way of the hydrodynamic bearings and expels the identical oil to the a part of the gears with low pressure.
Admin · 748 views · Leave a comment

Permanent link to full entry

http://handscars3657.sosblogs.com/The-first-blog-b1/How-To-Preserve-Gear-Pumps-b1-p349.htm

Comments

No Comment for this post yet...


Leave a comment

New feedback status: Published





Your URL will be displayed.


Please enter the code written in the picture.


Comment text

Options
   (Set cookies for name, e-mail and url)